HP.fm

411

HP-RELAYS

10 AMP POWER RELAY

VDE

2c, 3c

inch

.984

1.417

44.5

1.752

FEATURES

• Interchangeable with existing models

• Long life and high reliability

• High contact capacity up to 10 A 250 V AC

• Available with plug-in/solder and quick-connect terminals

SPECIFICATIONS (at 20

)

Contacts

Remarks

* Speciﬁcations will vary with foreign standards certiﬁcation ratings.

Measurement at same location as "initial breakdown voltage" section

Detection current; 10 mA

Excluding contact bounce time

Half-wave pulse of sine wave: 11ms; detection time: 10

Half-wave pulse of sine wave: 6ms

Detection time: 10

Refer to 5. Conditions for operation, transport and storage mentioned in

AMBIENT ENVIRONMENT (Page 61).

Characteristics (at 60 Hz, 20

)

Arrangement

2 Form C 3 Form C 4 Form C

Initial contact resistance, max.

(By voltage drop 6 V DC 1 A)

15 m

Ω

Contact material

Silver

alloy

Rating

Nominal switching

capacity

10 A 250 V AC (resistive)

2 Form C 3 Form C 4 Form C

Maximum operating speed

20 cpm

Initial insulation resistance*

more than 100 M

Ω

at 500 V DC

Breakdown

voltage*

Between open

contacts

1,000

Vrms

2,000

Vrms

1,000

Vrms

Between contact sets

1,500

Vrms

2,000

Vrms

1,500

Vrms

Between contact and

coil

1,500

Vrms

2,000

Vrms

1,500

Vrms

Operate time*

(at nominal voltage)

Approx.

15 ms

Approx. 25 ms

Release time (without diode)*

(at nominal voltage)

Approx.

15 ms

Approx. 25 ms

Temperature rise

Max. 65

Shock resistance

Functional*

98 m/s

{10 G}

Destructive*

980 m/s

{100 G}

Vibration resistance

Functional*

58.8 m/s

{6 G}, 10 to 55 Hz

at 1 mm double amplitude

Destructive

117.6 m/s

{12 G}, 10 to 55 Hz

at 2 mm double amplitude

Conditions for opera-

tion, transport and

storage*

(Not freezing and

condensing at low

temperature)

Ambient

temp.

–50

C to +40

–58

F to +104

Humidity

5 to 85% R.H.

Unit weight

Approx.

60g

2.12 oz

Approx.

100g

3.53 oz

Approx.

125g

4.41 oz

LIFE DATA

Contact rating and expected life For AC load type

Note: When the electromagnet or exciting coil (Solenoid, etc.) is the load, the value of motor or lamp load is applicable.

Voltage

125 V AC

250 V AC

Expected life

(min. operations)

Electrical

life

Load

Resistive (cos

]

Inductive (cos

]

0.4)

Resistive (cos

]

Inductive (cos

]

0.4)

Current

—

10 A

7.5 A

10 A

7.5 A

5 A

3 A

2 A

0.7 A

0.6 A

0.4 A

Mechanical life

412

Contact rating and expected life For DC load type

Voltage

24 V DC

125 V DC

Expected life

(min. operations)

Electrical

life

Load

Resistive (cos

]

Inductive (cos

]

0.4)

Resistive (cos

]

Inductive (cos

]

0.4)

Current

—

7 A

—

7.5 A

5 A

0.5 A

0.4 A

5 A

3 A

0.3 A

0.2 A

0.6 A

0.1 A

0.06 A

Mechanical life

Life curve

Notes:

1. For DC inductive loads, use an arc suppress-

ing circuit.

2. When used under a DC load operating at

high repetition rate with considerable arcing,

corrosion of the contacts and/or the contact

blades is likely to occur. When using the relay

under conditions of high temperature, humidity

or high repetition rate, it is suggested that the

relay cover be removed to facilitate extended

operation.

100

200

300

400

500

600

700

800

900

1,000

Load current, A

Operations,

125 V AC cos

= 1

V AC

cos

= 1

Mechanical life

more than 10,000,000

operations

TYPICAL APPLICATIONS

HP relays enjoy wide use in various appli-

cations, particularly in automation con-

trols and remote controls.

Applications include:

Industrial machinery

Machine tool

Food processing packing machines

Ofﬁce equipment

Coin operate devices

Home appliances

Transportation

Communication and measuring devices

Amusement devices

ORDERING INFORMATION

Ex. HP

Contact arrangement

2: 2 Form C

3: 3 Form C

4: 4 Form C

(Notes) 1. For UL/CSA or VDE recognized types, add suffix UL/CSA or VDE (HP2-TM type VDE application under way)

2. Standard packing Carton: 50 pcs. Case: 200 pcs.

3. UL/CSA approved type is standard.

Nil: Standard plug-in terminal

M: Direct mounting (3 Form C only)

TM: Top mounting (2 Form C only)

L: Lamp wired, standard plug-in terminal

AC 6, 12, 24, 48,

115, 220, 240 V

DC 6, 12, 24, 48,

110 V

Terminal

Coil voltage

AC240V

TYPES AND COIL DATA

1. Standard plug-in terminal type (without lamp wired)

DC TYPES at 20

Type

Part No.

Nominal coil

voltage, V DC

Pick-up

voltage,

V DC (max.)

Drop-out

voltage,

V DC (min.)

Max.

allowable

voltage, V DC

Coil

resistance,

Ω

(

10%)

Nominal coil

current, mA

Nominal

operating

power, W

2 Form C

HP2-DC6V

4.8

0.9

6.6

240

1.5

HP2-DC12V

9.6

1.8

13.2

110

109

1.3

HP2-DC24V

19.2

3.6

26.4

440

54.5

1.3

HP2-DC48V

38.4

7.2

52.8

1,800

26.7

1.3

HP2-DC110V

110

16.5

121

7,300

15.0

1.7

3 Form C

HP3-DC6V

4.8

0.9

6.6

250

1.5

HP3-DC12V

9.6

1.8

13.2

100

120

1.4

HP3-DC24V

19.2

3.6

26.4

400

1.4

HP3-DC48V

38.4

7.2

52.8

1,560

1.5

HP3-DC110V

110

16.5

121

7,450

14.9

1.6

4 Form C

HP4-DC6V

4.8

0.9

6.6

273

1.6

HP4-DC12V

9.6

1.8

13.2

127

1.5

HP4-DC24V

19.2

3.6

26.4

380

1.5

HP4-DC48V

38.4

7.2

52.8

1,500

1.5

HP4-DC110V

110

16.5

121

7,000

15.7

1.7

413

AC TYPE (50/60 Hz) at 60 Hz, 20

Type

Part No.

Nominal coil

voltage, V AC

Pick-up

voltage,

V AC (max.)

Drop-out

voltage,

V AC (min.)

Max.

allowable

voltage, V AC

Inductance,

Nominal coil

current, mA

Nominal

operating

power, VA

2 Form C

HP2-AC6V

4.8

1.8

6.6

0.049

310

1.9

HP2-AC12V

9.6

3.6

13.2

0.190

160

1.9

HP2-AC24V

19.2

7.2

26.4

0.776

1.9

HP2-AC48V

38.4

14.4

52.8

3.106

1.9

HP2-AC115V

115

34.5

126.5

15.83

2.1

HP2-AC220V

220

176

242

57.90

9.5

2.1

HP2-AC240V

240

192

264

66.26

9.0

2.2

3 Form C

HP3-AC6V

4.8

1.8

6.6

0.030

520

3.1

HP3-AC12V

9.6

3.6

13.2

0.119

260

3.1

HP3-AC24V

19.2

7.2

26.4

0.475

130

3.1

HP3-AC48V

38.4

14.4

52.8

1.899

3.1

HP3-AC115V

115

34.5

126.5

10.36

28.5

3.3

HP3-AC220V

220

176

242

39.32

14.2

3.1

HP3-AC240V

240

192

264

44.05

13.9

3.3

4 Form C

HP4-AC6V

4.8

1.8

6.6

0.019

800

4.8

HP4-AC12V

9.6

3.6

13.2

0.077

400

4.8

HP4-AC24V

19.2

7.2

26.4

0.309

200

4.8

HP4-AC48V

38.4

14.4

52.8

1.292

4.6

HP4-AC115V

115

34.5

126.5

6.953

4.8

HP4-AC220V

220

176

242

26.57

4.6

HP4-AC240V

240

192

264

29.75

20.5

4.9

NOTES

1. The range of coil current for AC relays

15% (60 Hz). For DC relays it is

10% at 20

2. The HP relay will operate in a range

from 80% to 110% of the nominal coil

voltage. It is, however, recommended

that the relay be used in the range of

85% to 110% of the nominal coil volt-

age, with the temporary voltage varia-

tion taken into consideration.

3. When the operating voltage of AC re-

lays drops below 80% of the nominal

coil voltage, the relay will generate a

considerable amount of heat which is

not recommended for maximum efﬁ-

ciency.

4. The coil resistance of DC types is the

measured value of the coil at a temper-

ature of 20

. If the coil tempera-

ture changes by

C, the measured

value of the coil resistance should be

increased or decreased by 0.4%.

5. For applications from 220 V to 240 V

DC, connect a resistor in series with

the relay coil. See chart for resistor val-

ues.

Voltage

2 Form C 3 Form C 4 Form C

220 V DC

7.3 k

Ω

(5 W)

7.45 k

Ω

(5 W)

7 k

Ω

(5 W)

240 V DC

8.7 k

Ω

(5 W)

8.8 k

Ω

(5 W)

8.3 k

Ω

(5 W)

2. Standard plug-in terminal type (with lamp wired)

DC TYPES at 20

Type

Part No.

Nominal coil

voltage,

V DC

Pick-up

voltage,

V DC (max.)

Drop-out

voltage,

V DC (min.)

Max.

allowable

voltage,

V DC

Coil

resistance,

Ω

(

10%)

Nominal coil

current,

Nominal

operating

power,

2 Form C

LED

HP2-L-DC6V

4.8

0.9

6.6

240

1.5

HP2-L-DC12V

9.6

1.8

13.2

110

109

1.3

HP2-L-DC24V

19.2

3.6

26.4

440

54.5

1.3

HP2-L-DC48V

38.4

7.2

52.8

1,800

26.7

1.3

Neon lamp

HP2-L-DC110V

110

16.5

121

7,300

15.0

1.7

3 Form C

LED

HP3-L-DC6V

4.8

0.9

6.6

250

1.5

HP3-L-DC12V

9.6

1.8

13.2

100

120

1.4

HP3-L-DC24V

19.2

3.6

26.4

400

1.4

HP3-L-DC48V

38.4

7.2

52.8

1,560

1.5

Neon lamp

HP3-L-DC110V

110

16.5

121

7,450

14.9

1.6

4 Form C

LED

HP4-L-DC6V

4.8

0.9

6.6

273

1.6

HP4-L-DC12V

9.6

1.8

13.2

127

1.5

HP4-L-DC24V

19.2

3.6

26.4

380

1.5

HP4-L-DC48V

38.4

7.2

52.8

1,500

1.5

Neon lamp

HP4-L-DC110V

110

16.5

121

7,000

15.7

1.7