/home/techdatasheets.com/WWW/datasheets_html/444422/datasheet-S8016N

iii

http://www.teccor.com

Thyristor Product Catalog

+1 972-580-7777

Contents

Product Selection Guide

Product Descriptions - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - vi

Circuit Requirement Diagram - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - vii

Product Packages - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - viii

Description of Part Numbers- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - x

Quality and Reliability Assurance - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - xii

Standard Terms and Conditions - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - xiv

Data Sheets

V-I Characteristics of Thyristor Devices - - - - - - - - - - - - - - - - - - - - - - - - E0-2

Electrical Parameter Terminology - - - - - - - - - - - - - - - - - - - - - - - - - - - - E0-3

Electrical Specifications

Sensitive Triacs - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - E1

Triacs - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - E2

QUADRACs - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - E3

Alternistor Triacs - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - E4

Sensitive SCRs - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - E5

SCRs - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - E6

Rectifiers - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - E7

Diacs - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - E8

SIDAC - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - E9

Mechanical Specifications

Package Dimensions - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - M1

Lead Form Dimensions - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - M2

Packing Options - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - M3

Application Notes

Fundamental Characteristics of Thyristors - - - - - - - - - - - - - - - - - - - AN1001

Gating, Latching, and Holding of SCRs and Triacs - - - - - - - - - - - - - AN1002

Phase Control Using Thyristors- - - - - - - - - - - - - - - - - - - - - - - - - - - AN1003

Mounting and Handling of Semiconductor Devices - - - - - - - - - - - - - AN1004

Surface Mount Soldering Recommendations - - - - - - - - - - - - - - - - - AN1005

Testing Teccor Semiconductor Devices

Using Curve Tracers - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - AN1006

Thyristors Used As AC Static Switches and Relays - - - - - - - - - - - - AN1007

Explanation of Maximum Ratings and Characteristics for Thyristors - AN1008

Miscellaneous Design Tips and Facts - - - - - - - - - - - - - - - - - - - - - - AN1009

Thyristors for Ignition of Fluorescent Lamps - - - - - - - - - - - - - - - - - - AN1010

Appendix

Cross Reference Guide - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - A1

Part Numbers Index- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - A27

http://www.teccor.com

P - 2

+1 972-580-7777

Thyristor Product Catalog(972) 580-7777

Product Descriptions

Thyristors

A thyristor is any semiconductor switch with a bi-stable action

depending on p-n-p-n regenerative feedback. Thyristors are nor-

mally two- or three-terminal devices for either unidirectional or bi-

directional circuit configurations. Thyristors can have many forms,

but they have certain commonalities. All thyristors are solid state

switches that are normally open circuits (very high impedance),

capable of withstanding rated blocking/off-state voltage until trig-

gered to on state. When triggered to on state, thyristors become a

low-impedance current path until principle current either stops or

drops below a minimum holding level. After a thyristor is triggered

to on-state condition, the trigger current can be removed without

turning off the device. Thyristors are used to control the flow of

electrical currents in applications including:

•

Home appliances (lighting, heating, temperature control, alarm

activation, fan speed)

•

Electrical tools (for controlled actions such as motor speed, sta-

pling event, battery charging)

•

Outdoor equipment (water sprinklers, gas engine ignition, elec-

tronic displays, area lighting, sports equipment, physical fitness)

Sensitive Triacs

Teccor's sensitive gate triacs are AC bidirectional silicon

switches that provide guaranteed gate trigger current levels in

Quadrants I, II, III, and IV. Interfacing to microprocessors or other

equipment with single polarity gate triggering is made possible with

sensitive gate triacs. Gate triggering currents of 3 mA, 5 mA,

10 mA, or 20 mA may be specified.

Sensitive gate triacs are capable of controlling AC load currents

from 0.8 A to 8 A rms and can withstand operating voltages from

200 V to 600 V.

Triacs

Teccor's triac products are bidirectional AC switches, capable of

controlling loads from 0.8 A to 35 A rms with 10 mA, 25 mA, and

50 mA I

in operating Quadrants I, II and III.

Triacs are useful in full-wave AC applications to control AC power

either through full-cycle switching or phase control of current to the

load element. These triacs are rated to block voltage in the “OFF”

condition from 200 V minimum with selected products capable of

1000 V operation. Typical applications include motor speed con-

trols, heater controls, and incandescent light controls.

Quadrac

Quadrac devices, originally developed by Teccor, are triacs and

alternistor triacs with a diac trigger mounted inside the same pack-

age. These devices save the user the expense and assembly time

of buying a discrete diac and assembling in conjunction with a

gated triac.

The Quadrac

is offered in capacities from 4 A to 15 A rms and volt-

ages from 200 V ac to 600 V ac.

Alternistor Triacs

The Teccor alternistor is specifically designed for applications

required to switch highly inductive loads. The design of this special

chip effectively offers the same performance as two thyristors

(SCRs) wired inverse parallel (back-to-back).

This new chip construction provides the equivalent of two electri-

cally-separate SCR structures, providing enhanced dv/dt charac-

teristics while retaining the advantages of a single-chip device.

Teccor manufactures 6 A to 40 A alternistors with blocking voltage

rating from 200 V to 1000 V. Alternistors are offered in TO-220,

TO-218, and TO-218X packages with isolated and non-isolated

versions.

Sensitive SCRs

Teccor's sensitive gate SCRs are silicon-controlled rectifiers repre-

senting the best in design, performance, and packaging techniques

for low- and medium-current applications.

Anode currents of 0.8 A to 10 A rms can be controlled by sensitive

gate SCRs with gate drive currents ranging from 12 µA to 500 µA.

Sensitive gate SCRs are ideally suited for interfacing to integrated

circuits or in applications where high current load requirements and

limited gate drive current capabilities exist. Examples include igni-

tion circuits, motor controls, and DC latching for alarms in smoke

detectors. Sensitive gate SCRs are available in voltage ratings to

600 V ac.

SCRs

Teccor's SCR products are half-wave, silicon-controlled rectifiers

that represent the state of the art in design and performance.

Load current capabilities range from 1 A to 70 A rms, and voltages

from 200 V to 1000 V may be specified to meet a variety of appli-

cation needs.

Because of its unidirectional switching capability, the SCR is used

in circuits where high surge currents or latching action is required.

It may also be used for half-wave-type circuits where gate-con-

trolled rectification action is required. Applications include crow-

bars in power supplies, camera flash units, smoke alarms, motor

controls, battery chargers, and engine ignition.

Surge current ratings are available from 30 A in the TO-92 packag-

ing to 950 A in the TO-218X package.

Rectifiers

Teccor manufactures 15 A to 25 A rms rectifiers with voltages

rated from 200 V to 1000 V. Due to the electrically isolated TO-220

package, these rectifiers may be used in common anode or com-

mon cathode circuits using only one part type, thereby simplifying

stock requirements.

Diacs

Diacs are trigger devices used in phase control circuits to provide

gate pulses to a triac or SCR. They are voltage-triggered bidirec-

tional silicon devices housed in DO-35 glass axial lead packages

and DO-214 surface mount packages.

Diac voltage selections from 27 V to 45 V provide trigger pulses

closely matched in symmetry at the positive and negative break-

over points to minimize DC component in the load circuit.

Some applications include gate triggers for light controls, dimmers,

power pulse circuits, voltage references in AC power circuits, and

triac triggers in motor speed controls.

Sidacs

Sidacs represent a unique set of thyristor qualities. The sidac is a

bidirectional voltage triggered switch. Some characteristics of this

device include a normal 95 V to 330 V switching point, negative

resistance range, latching characteristics at turn-on, and a low on-

state voltage drop.

One-cycle surge current capability up to 20 A makes the sidac an

ideal product for dumping charged capacitors through an inductor

in order to generate high-voltage pulses. Applications include light

controls, high-pressure sodium lamp starters, power oscillators,

and high-voltage power supplies.

http://www.teccor.com

P - 6

+1 972-580-7777

Thyristor Product Catalog(972) 580-7777

Description of Part Numbers

Sensitive Triac

Quadrac

Sensitive SCR

Triac and Alternistor

Device Type

L = Sensitive Triac

Voltage Rating

20 = 200 V

40 = 400 V

60 = 600 V

Current Rating

Package Type

Blank =

Compak (Surface Mount)

D = TO-252 (Surface Mount)

E = TO-92 (Isolated)

F = TO-202 (Non-islolated)

L = TO-220 (Isolated)

V = TO-251 (Non-islolated)

Gate Variations

3 = 3 mA (Q I, II, III, IV)

5 = 5 mA (Q I, II, III, IV)

6 = 5 mA (Q I, II, III)

6 = 10 mA (Q IV)

8 = 10 mA (Q I, II, III)

8 = 20 mA (Q IV)

Lead Form Dimensions

TO-202

TO-220

TO-92

Special Options

V = 4000 V Isolation

(TO-220 Package Only)

X8 = 0.8 A

N = 1 A

01 = 1 A

04 = 4 A

06 = 6 A

08 = 8 A

Device Type

Q =

Quadrac

Voltage Rating

20 = 200 V

40 = 400 V

60 = 600 V

Current Rating

04 = 4 A

06 = 6 A

08 = 8 A

10 = 10 A

15 = 15 A

Package Type

L = TO-220 (Isolated)

Gate Variation

T = Internal Diac Trigger

Lead Form Dimensions

TO-220

Special Options

V = 4000 V Isolation

(TO-220 Package Only)

Alternistor

Device Type

Q = Triac or Alternistor

Voltage Rating

20 = 200 V

40 = 400 V

60 = 600 V

80 = 800 V

K0 = 1000 V

Current Rating

X8 = 0.8 A

01 = 1 A

04 = 4 A

06 = 6 A

08 = 8 A

10 = 10 A

12 = 12 A

15 = 15 A

25 = 25 A

30 = 30 A

35 = 35 A

40 = 40 A

Gate Variation

DH3 and VH3 = 10mA (Q I, II, III)

3 = 10 mA (Q I, II, III)

H3 = 20mA (Q I, II, III)

4 = 25 mA (Q I, II, III)

H4 = 35 mA (Q I, II, III) *

5 = 50 mA (Q I, II, III)

H5 = 50 mA (Q I, II, III) *

6 = 80 mA (Q I, II, III) *

7 = 100 mA (Q I, II, III) *

Lead Form Dimensions

TO-202

TO-220

TO-92

TO-218X

TO-218

Special Options

V = 4000 V Isolation

(TO-220 Package Only)

Package Type

D = TO-252 (Surface Mount)

E = TO-92 (Isolated)

F = TO-202 (Non-isolated)

J = TO-218X (Isolated)

K = TO-218 (Isolated)

L = TO-220 (Isolated)

N = TO-263 (Surface Mount)

P =

Fastpak (Isolated)

R = TO-220 (Non-isolated)

V = TO-251 (Non-isolated)

W = TO-218X (Non-isolated)

* NOTE:

Alternistor device; no Quadrant IV operation

Device Type

S = Sensitive SCR

Voltage Rating

20 = 200 V

40 = 400 V

60 = 600 V

Current Rating

X8 = 0.8 A

N = 1 A

06 = 6 A

08 = 8 A

10 = 10 A

Package Type

Blank = Compak (Surface Mount)

D = TO-252 (Surface Mount)

F = TO-202 (Non-islolated)

L = TO-220 (Isolated)

V = TO-251 (Non-islolated)

Gate Variations

S1 = 50 µA

S2 = 200 µA

S3 = 500 µA

Lead Form Dimensions

TO-202

TO-220

Special Options

V = 4000 V Isolated

(TO-220 Package Only)

103

Device Type

TCR = TO-92 (Isolated)

EC = TO-92 (Isolated)

T = TO-202 (Non-isolated)

2N = JEDEC (Isolated)

Voltage Rating for TCR

-4 = 200 V

-6 = 400 V

-8 = 600 V

Current Rating for TCR

22 = 1.5 A

Lead Form Dimensions

TO-92

TO-202

Current Rating for EC

103 = 0.8 A

Current Rating for T

106 = 4 A (I

= 200 µA)

107 = 4 A (I

= 500 µA)

Current Rating for 2N

5xxx = 0.8 A

Gate Current (for EC series only)

None = 200 µA

1 = 12 µA

2 = 50 µA

3 = 500 µA

Voltage Rating for EC and T

B = 200 V

D = 400 V

M = 600 V

Voltage Rating for 2N

5064 = 200 V

6565 = 400 V

P - 7

http://www.teccor.com

Thyristor Product Catalog

+1 972-580-7777

Description of Part Numbers

SCR

Rectifier

Diac

Sidac

Device Type

S = Non-sensitive SCR

Voltage Rating

20 = 200 V

40 = 400 V

60 = 600 V

80 = 800 V

K0 = 1000 V

Current Rating

01 = 1 A

06 = 6 A

08 = 8 A

10 = 10 A

12 = 12 A

15 = 15 A

16 = 16 A

20 = 20 A

25 = 25 A

35 = 35 A

55 = 55 A

65 = 65 A

70 = 70 A

Package Type

D = TO

252 (Surface Mount)

E = TO

92 (Isolated)

F = TO-202 (Non-isolated)

J = TO-218X (Isolated)

K = TO-218 (Isolated)

L = TO-220 (Isolated)

M = TO-218 (Non-isolated)

N = TO-263 (Surface Mount)

R = TO-220 (Non-isolated)

V = TO

251 (Non-isolated)

W = TO-218X (Non-isolated)

Lead Form Dimensions

202

220

218X

218

Special Options

V = 4000 V Isolation

(TO-220 Package Only)

Device Type

D = Rectifier

Voltage Rating

20 = 200 V

40 = 400 V

60 = 600 V

80 = 800 V

K0 = 1000 V

Current Rating

15 = 15 A

20 = 20 A

25 = 25 A

Package Type

L = TO-220 (Isolated)

Lead Form Dimensions

TO-220

Special Options

V = 4000 V Isolation

Device Type

HT = Diac Trigger in DO-35

ST = Diac Trigger in DO-214

Lead Form Dimensions

DO-35

Voltage Rating

32 = 27 V to 37 V

35 = 30 V to 40 V

40 = 35 V to 45 V

32A / 5761 = 28 V to 36 V

32B / 5761A = 30 V to 34 V

34B = 32 V to 36 V

36A / 5762 = 32 V to 40 V

36B = 34 V to 38 V

105

Device Type

K = Sidac

Voltage Rating

105 = 95 V to 113 V

110 = 104 V to 118 V

120 = 110 V to 125 V

130 = 120 V to 138 V

140 = 130 V to 146 V

150 = 140 V to 170 V

200 = 190 V to 215 V

220 = 205 V to 230 V

240 = 220 V to 250 V

250 = 240 V to 280 V

300 = 270 V to 330 V

Current Rating

0 = 1 A

Package Type

E = TO-92 (Isolated)

F = TO-202 (Non-islolated)

G = DO-15X (Isolated)

S = DO-214 (Surface Mount)

Lead Form Dimensions

TO-202

TO-92

http://www.teccor.com

P - 8

+1 972-580-7777

Thyristor Product Catalog(972) 580-7777

Quality and Reliability

It is Teccor’s policy to ship quality products on time. We accom-

plish this through Total Quality Management based on the funda-

mentals of customer focus, continuous improvement, and people

involvement.

In support of this commitment, Teccor applies the following princi-

ples:

•

Employees shall be respected, involved, informed, and qualified

for their job with appropriate education, training, and experience.

•

Customer expectations shall be met or exceeded by consistently

shipping products that meet the agreed specifications, quality

levels, quantities, schedules, and test and reliability parameters.

•

Suppliers shall be selected by considering quality, service, deliv-

ery, and cost of ownership.

•

Design of products and processes will be driven by customer

needs, reliability, and manufacturability.

It is the responsibility of management to incorporate these

principles into policies and systems.

It is the responsibility of those in leadership roles to coach their

people and to reinforce these principles.

It is the responsibility of each individual employee to follow the

spirit of this statement to ensure that we meet the primary policy

— to ship quality products on time.

Quality Assurance

Incoming Material Quality

Teccor “Vendor Analysis” programs provide stringent require-

ments before components are delivered to Teccor. In addition,

purchased materials are tested rigidly at incoming inspection for

specification compliance prior to acceptance for use.

Process Controls

From silicon slice input through final testing, we use statistical

methods to control all critical processes. Process audits and lot

inspections are performed routinely at all stages of the manufac-

turing cycle.

Parametric Testing

All devices are 100% computer tested for specific electrical char-

acteristics at critical processing points.

Final Inspection

Each completed manufacturing lot is sampled and tested for

compliance with electrical and mechanical requirements.

Reliability Testing

Random samples are taken from various product families for

ongoing reliability testing.

Finished Goods Inspection

Product assurance inspection is performed immediately prior to

shipping.

Design Assurance

The design and production of Teccor devices is a demanding and

challenging task. Disciplined skills coupled with advanced com-

puter-aided design, production techniques, and test equipment

are essential elements in Teccor's ability to meet your demands

for the very highest levels of quality.

All products must first undergo rigid quality design reviews and

pass extensive environmental life testing. Teccor uses Statistical

Process Control (SPC) with associated control charts throughout

to monitor the manufacturing processes.

Only those products which pass tests designed to assure Tec-

cor's high quality and reliability standards, while economically

satisfying customer requirements, are approved for shipment. All

new products and materials must receive approval of QRA prior

to being released to production.

The combination of reliability testing, process controls, and lot

tracking assures the quality and reliability of Teccor's devices.

Since even the best control systems cannot overcome measure-

ment limitations, Teccor designs and manufactures its own com-

puterized test equipment.

Teccor's Reliability Engineering Group conducts ongoing product

reliability testing to further confirm the design and manufacturing

parameters.