PAGE . 3
Approve Sheet
Part Number: 1.5SMCJ SERIES
1.5SMCJ SERIES
SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR
VOLTAGE - 5.0 to 220 Volts 1500 Watt Peak Power Pulse
RATING
Peak Power Dissipation at T
A
=25°C, T
P
=1ms(Note 1,2 ,Fig.1 )
Peak Forward Surge Current,8.3ms single half sine-wave
superimposed on rated load (Note 2,3)
Peak Pulse Current Current on 10/1000µs waveform(Note 1,Fig.3 )
Operating and Storage Temperature Range
° C
NOTES:
1.Non-repetitive current pulse, per Fig. 3 and derated above T
A
=25°Cper Fig. 2.
2.Mounted on 5.0mm
2
( .013mm thick) land areas.
3 8.3ms , single half sine-wave or equivalent square wave , duty cycle= 4 pulses per minutes maximum.
FEATURES
• For surface mounted applications in order to optimize board space.
• Low profile package
• Built-in strain relief
• Glass passivated junction
• Excellent clamping capability
• Low inductance
• Fast response time: typically less than 1.0 ps from 0 volts to BV min
• Typical IR less than 1µA above 10V
• High temperature soldering : 250°C/10 seconds at terminals.
• Plastic package has Underwriters Laboratory Flammability
Classification 94V-O
MECHANICAL DATA
Case: JEDEC DO-214AB, Molded plastic over passivated junction
Terminals: Solder plated , solderable per MIL-STD-750, Method 2026
Polarity: Color band denotes positive end ( cathode) except Bidirectional.
Standard Packageing: 16mm tape per (EIA-481)
Weight: 0.007 ounces, 0.21 gram
MAXIMUM RATINGS AND CHARACTERISTICS
Rating at 25°Cambient temperature unless otherwise specified. Resistive or inductive load, 60Hz.
For Capacitive load derate current by 20%.
SYMBOL
VALUE
UNITS
P
PPM
Minimum 1500
Watts
100.0
Amps
T
J
, T
STG
-55 to +150
SMC / DO-214AB
Unit: inch ( mm )
.108
(2.75)
.128
(3.25)
.220
(5.59)
.245
(6.22)
.260 (6.60)
.280 (7.11)
.006 (.152)
.012 (.305)
.008(.203)
.002(.051)
.305 (7.75)
.320 (8.13)
.030 (0.76)
.050 (1.27)
.079
(2.00)
.103
(2.62)
3.DATA SHEET
I
FSM
I
PPM
See Table 1
Amps
