MOTOROLA
SEMICONDUCTOR TECHNICAL DATA
1
REV 0.1
©
Motorola, Inc. 1997
3/97
Advance Information
Hex 3-State Noninverting
Buffer with Common Enables
High–Performance Silicon–Gate CMOS
The MC74HC365A is identical in pinout to the LS365. The device inputs
are compatible with standard CMOS outputs; with pullup resistors, they are
compatible with LSTTL outputs.
This device is a high–speed hex buffer with 3–state outputs and two
common active–low Output Enables. When either of the enables is high, the
buffer outputs are placed into high–impedance states. The HC365A has
noninverting outputs.
•
Output Drive Capability: 15 LSTTL Loads
•
Outputs Directly Interface to CMOS, NMOS, and TTL
•
Operating Voltage Range: 2 to 6 V
•
Low Input Current: 1
µ
A
•
High Noise Immunity Characteristic of CMOS Devices
•
In Compliance with the Requirements Defined by JEDEC Standard
No. 7A
•
Chip Complexity: 90 FETs or 22.5 Equivalent Gates
LOGIC DIAGRAM
A3
A4
A5
A0
A1
A2
2
4
6
10
12
14
OUTPUT ENABLE 1
1
15
PIN 16 = VCC
PIN 8 = GND
OUTPUT ENABLE 2
Y3
Y4
Y5
Y0
Y1
Y2
3
5
7
9
11
13
This document contains information on a new product. Specifications and information herein are subject to
change without notice.
MC74HC365A
PIN ASSIGNMENT
FUNCTION TABLE
X = don’t care
Z = high impedance
13
14
15
16
9
10
11
12
5
4
3
2
1
8
7
6
A4
Y5
A5
OUTPUT
ENABLE 2
VCC
Y3
A3
Y4
A1
Y0
A0
OUTPUT
ENABLE 1
GND
Y2
A2
Y1
Inputs
Output
Enable
1
Enable
2
A
Y
L
L
H
X
L
L
X
H
L
H
X
X
L
H
Z
Z
D SUFFIX
SOIC PACKAGE
16–LEAD
CASE 751B–05
N SUFFIX
PLASTIC PACKAGE
16–LEAD
CASE 648–08
ORDERING INFORMATION
MC74HCXXXAN
MC74HCXXXAD
MC74HCXXXADT
Plastic
SOIC
TSSOP
DT SUFFIX
TSSOP PACKAGE
16–LEAD
CASE 948F–01
MC74HC365A
MOTOROLA
High–Speed CMOS Logic Data
DL129 — Rev 6
2
ÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽ
ÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽ
MAXIMUM RATINGS*
ÃŽÃŽÃŽ
ÃŽÃŽÃŽ
Symbol
ÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽ
ÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽ
Parameter
ÃŽÃŽÃŽÃŽÃŽÃŽ
ÃŽÃŽÃŽÃŽÃŽÃŽ
Value
ÃŽÃŽÃŽ
ÃŽÃŽÃŽ
Unit
ÃŽÃŽÃŽ
ÃŽÃŽÃŽ
VCC
ÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽ
ÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽ
DC Supply Voltage (Referenced to GND)
ÃŽÃŽÃŽÃŽÃŽÃŽ
ÃŽÃŽÃŽÃŽÃŽÃŽ
– 0.5 to + 7.0
ÃŽÃŽÃŽ
ÃŽÃŽÃŽ
V
ÃŽÃŽÃŽ
ÃŽÃŽÃŽ
Vin
ÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽ
ÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽ
DC Input Voltage (Referenced to GND)
ÃŽÃŽÃŽÃŽÃŽÃŽ
ÃŽÃŽÃŽÃŽÃŽÃŽ
– 0.5 to VCC + 0.5
ÃŽÃŽÃŽ
ÃŽÃŽÃŽ
V
ÃŽÃŽÃŽ
ÃŽÃŽÃŽ
Vout
ÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽ
ÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽ
DC Output Voltage (Referenced to GND)
ÃŽÃŽÃŽÃŽÃŽÃŽ
ÃŽÃŽÃŽÃŽÃŽÃŽ
– 0.5 to VCC + 0.5
ÃŽÃŽÃŽ
ÃŽÃŽÃŽ
V
ÃŽÃŽÃŽ
ÃŽÃŽÃŽ
Iin
ÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽ
ÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽ
DC Input Current, per Pin
ÃŽÃŽÃŽÃŽÃŽÃŽ
ÃŽÃŽÃŽÃŽÃŽÃŽ
±
20
ÃŽÃŽÃŽ
ÃŽÃŽÃŽ
mA
ÃŽÃŽÃŽ
ÃŽÃŽÃŽ
Iout
ÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽ
ÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽ
DC Output Current, per Pin
ÃŽÃŽÃŽÃŽÃŽÃŽ
ÃŽÃŽÃŽÃŽÃŽÃŽ
±
25
ÃŽÃŽÃŽ
ÃŽÃŽÃŽ
mA
ÃŽÃŽÃŽ
ÃŽÃŽÃŽ
ICC
ÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽ
ÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽ
DC Supply Current, VCC and GND Pins
ÃŽÃŽÃŽÃŽÃŽÃŽ
ÃŽÃŽÃŽÃŽÃŽÃŽ
±
50
ÃŽÃŽÃŽ
ÃŽÃŽÃŽ
mA
ÃŽÃŽÃŽ
ÃŽ
ÃŽ
ÃŽ
ÃŽ
ÃŽ
ÃŽ
PD
ÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽ
ÃŽ
ÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽ
ÃŽ
ÃŽ
ÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽ
ÃŽ
Power Dissipation in Still Air,
Plastic DIPâ€
SOIC Packageâ€
TSSOP Packageâ€
ÃŽÃŽÃŽÃŽÃŽÃŽ
ÃŽ
ÃŽÃŽÃŽÃŽ
ÃŽ
ÃŽ
ÃŽÃŽÃŽÃŽ
ÃŽ
750
500
450
ÃŽÃŽÃŽ
ÃŽ
ÃŽ
ÃŽ
ÃŽ
ÃŽ
ÃŽ
mW
ÃŽÃŽÃŽ
ÃŽ
ÃŽ
ÃŽ
Tstg
ÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽ
ÃŽ
ÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽ
ÃŽ
Storage Temperature
ÃŽÃŽÃŽÃŽÃŽÃŽ
ÃŽ
ÃŽÃŽÃŽÃŽ
ÃŽ
– 65 to + 150
ÃŽÃŽÃŽ
ÃŽ
ÃŽ
ÃŽ
_
C
ÃŽÃŽÃŽ
ÃŽ
ÃŽ
ÃŽ
ÃŽÃŽÃŽ
TL
ÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽ
ÃŽ
ÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽ
ÃŽ
ÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽ
Lead Temperature, 1 mm from Case for 10 Seconds
Plastic DIP, SOIC or TSSOP Package
ÃŽÃŽÃŽÃŽÃŽÃŽ
ÃŽ
ÃŽÃŽÃŽÃŽ
ÃŽ
ÃŽÃŽÃŽÃŽÃŽÃŽ
260
ÃŽÃŽÃŽ
ÃŽ
ÃŽ
ÃŽ
ÃŽÃŽÃŽ
_
C
* Maximum Ratings are those values beyond which damage to the device may occur.
Functional operation should be restricted to the Recommended Operating Conditions.
†Derating — Plastic DIP: – 10 mW/
_
C from 65
_
to 125
_
C
SOIC Package: – 7 mW/
_
C from 65
_
to 125
_
C
TSSOP Package: – 6.1 mW/
_
C from 65
_
to 125
_
C
For high frequency or heavy load considerations, see Chapter 2 of the Motorola High–Speed CMOS Data Book (DL129/D).
RECOMMENDED OPERATING CONDITIONS
ÃŽÃŽÃŽÃŽ
ÃŽÃŽÃŽÃŽ
Symbol
ÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽ
ÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽ
Parameter
ÃŽÃŽÃŽ
ÃŽÃŽÃŽ
Min
ÃŽÃŽÃŽ
ÃŽÃŽÃŽ
Max
ÃŽÃŽÃŽ
ÃŽÃŽÃŽ
Unit
ÃŽÃŽÃŽÃŽ
ÃŽÃŽÃŽÃŽ
VCC
ÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽ
ÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽ
DC Supply Voltage (Referenced to GND)
ÃŽÃŽÃŽ
ÃŽÃŽÃŽ
2.0
ÃŽÃŽÃŽ
ÃŽÃŽÃŽ
6.0
ÃŽÃŽÃŽ
ÃŽÃŽÃŽ
V
ÃŽÃŽÃŽÃŽ
ÃŽÃŽÃŽÃŽ
Vin, Vout
ÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽ
ÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽ
DC Input Voltage, Output Voltage (Referenced to GND)
ÃŽÃŽÃŽ
ÃŽÃŽÃŽ
0
ÃŽÃŽÃŽ
ÃŽÃŽÃŽ
VCC
ÃŽÃŽÃŽ
ÃŽÃŽÃŽ
V
ÃŽÃŽÃŽÃŽ
ÃŽÃŽÃŽÃŽ
TA
ÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽ
ÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽ
Operating Temperature, All Package Types
ÃŽÃŽÃŽ
ÃŽÃŽÃŽ
– 55
ÃŽÃŽÃŽ
ÃŽÃŽÃŽ
+ 125
ÃŽÃŽÃŽ
ÃŽÃŽÃŽ
_
C
ÃŽÃŽÃŽÃŽ
ÃŽ
ÃŽÃŽ
ÃŽ
ÃŽÃŽÃŽÃŽ
tr, tf
ÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽ
ÃŽ
ÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽ
ÃŽ
ÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽ
Input Rise and Fall Time
VCC = 2.0 V
(Figure 1)
VCC = 4.5 V
VCC = 6.0 V
ÃŽÃŽÃŽ
ÃŽ
ÃŽ
ÃŽ
ÃŽÃŽÃŽ
0
0
0
ÃŽÃŽÃŽ
ÃŽ
ÃŽ
ÃŽ
ÃŽÃŽÃŽ
1000
500
400
ÃŽÃŽÃŽ
ÃŽ
ÃŽ
ÃŽ
ÃŽÃŽÃŽ
ns
DC ELECTRICAL CHARACTERISTICS
(Voltages Referenced to GND)
ÃŽÃŽÃŽÃŽ
ÃŽÃŽÃŽÃŽ
S
b l
ÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽ
ÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽ
P
ÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽ
ÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽ
T
C
di i
ÃŽÃŽÃŽÃŽ
ÃŽÃŽÃŽÃŽ
V
ÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽ
ÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽ
Guaranteed Limit
ÃŽÃŽÃŽ
ÃŽÃŽÃŽ
U i
ÃŽÃŽÃŽÃŽ
ÃŽ
ÃŽÃŽ
ÃŽ
ÃŽÃŽÃŽÃŽ
Symbol
ÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽ
ÃŽ
ÃŽÃŽÃŽÃŽÃŽÃŽÃŽ
ÃŽ
ÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽ
Parameter
ÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽ
ÃŽ
ÃŽÃŽÃŽÃŽÃŽÃŽÃŽ
ÃŽ
ÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽ
Test Conditions
ÃŽÃŽÃŽÃŽ
ÃŽ
ÃŽÃŽ
ÃŽ
ÃŽÃŽÃŽÃŽ
VCC
V
ÃŽÃŽÃŽ
ÃŽ
ÃŽÃŽ
ÃŽÃŽÃŽ
– 55 to
25
_
C
ÃŽÃŽÃŽÃŽ
ÃŽ
ÃŽÃŽ
ÃŽ
ÃŽÃŽÃŽÃŽ
v
85
_
C
ÃŽÃŽÃŽÃŽ
ÃŽ
ÃŽÃŽ
ÃŽ
ÃŽÃŽÃŽÃŽ
v
125
_
C
ÃŽÃŽÃŽ
ÃŽ
ÃŽ
ÃŽ
ÃŽÃŽÃŽ
Unit
ÃŽÃŽÃŽÃŽ
ÃŽ
ÃŽÃŽ
ÃŽ
ÃŽ
ÃŽÃŽ
ÃŽ
ÃŽ
ÃŽÃŽ
ÃŽ
VIH
ÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽ
ÃŽ
ÃŽÃŽÃŽÃŽÃŽÃŽÃŽ
ÃŽ
ÃŽ
ÃŽÃŽÃŽÃŽÃŽÃŽÃŽ
ÃŽ
ÃŽ
ÃŽÃŽÃŽÃŽÃŽÃŽÃŽ
ÃŽ
Minimum High–Level Input
Voltage
ÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽ
ÃŽ
ÃŽÃŽÃŽÃŽÃŽÃŽÃŽ
ÃŽ
ÃŽ
ÃŽÃŽÃŽÃŽÃŽÃŽÃŽ
ÃŽ
ÃŽ
ÃŽÃŽÃŽÃŽÃŽÃŽÃŽ
ÃŽ
Vout = VCC – 0.1 V
|Iout|
v
20
µ
A
ÃŽÃŽÃŽÃŽ
ÃŽ
ÃŽÃŽ
ÃŽ
ÃŽ
ÃŽÃŽ
ÃŽ
ÃŽ
ÃŽÃŽ
ÃŽ
2.0
3.0
4.5
6.0
ÃŽÃŽÃŽ
ÃŽ
ÃŽÃŽ
ÃŽ
ÃŽÃŽ
ÃŽ
ÃŽÃŽ
1.5
2.1
3.15
4.2
ÃŽÃŽÃŽÃŽ
ÃŽ
ÃŽÃŽ
ÃŽ
ÃŽ
ÃŽÃŽ
ÃŽ
ÃŽ
ÃŽÃŽ
ÃŽ
1.5
2.1
3.15
4.2
ÃŽÃŽÃŽÃŽ
ÃŽ
ÃŽÃŽ
ÃŽ
ÃŽ
ÃŽÃŽ
ÃŽ
ÃŽ
ÃŽÃŽ
ÃŽ
1.5
2.1
3.15
4.2
ÃŽÃŽÃŽ
ÃŽ
ÃŽ
ÃŽ
ÃŽ
ÃŽ
ÃŽ
ÃŽ
ÃŽ
ÃŽ
V
ÃŽÃŽÃŽÃŽ
ÃŽ
ÃŽÃŽ
ÃŽ
ÃŽ
ÃŽÃŽ
ÃŽ
ÃŽÃŽÃŽÃŽ
VIL
ÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽ
ÃŽ
ÃŽÃŽÃŽÃŽÃŽÃŽÃŽ
ÃŽ
ÃŽ
ÃŽÃŽÃŽÃŽÃŽÃŽÃŽ
ÃŽ
ÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽ
Maximum Low–Level Input
Voltage
ÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽ
ÃŽ
ÃŽÃŽÃŽÃŽÃŽÃŽÃŽ
ÃŽ
ÃŽ
ÃŽÃŽÃŽÃŽÃŽÃŽÃŽ
ÃŽ
ÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽ
Vout = 0.1 V
|Iout|
v
20
µ
A
ÃŽÃŽÃŽÃŽ
ÃŽ
ÃŽÃŽ
ÃŽ
ÃŽ
ÃŽÃŽ
ÃŽ
ÃŽÃŽÃŽÃŽ
2.0
3.0
4.5
6.0
ÃŽÃŽÃŽ
ÃŽ
ÃŽÃŽ
ÃŽ
ÃŽÃŽ
ÃŽÃŽÃŽ
0.50
0.90
1.35
1.80
ÃŽÃŽÃŽÃŽ
ÃŽ
ÃŽÃŽ
ÃŽ
ÃŽ
ÃŽÃŽ
ÃŽ
ÃŽÃŽÃŽÃŽ
0.50
0.90
1.35
1.80
ÃŽÃŽÃŽÃŽ
ÃŽ
ÃŽÃŽ
ÃŽ
ÃŽ
ÃŽÃŽ
ÃŽ
ÃŽÃŽÃŽÃŽ
0.50
0.90
1.35
1.80
ÃŽÃŽÃŽ
ÃŽ
ÃŽ
ÃŽ
ÃŽ
ÃŽ
ÃŽ
ÃŽÃŽÃŽ
V
ÃŽÃŽÃŽÃŽ
ÃŽ
ÃŽÃŽ
ÃŽ
ÃŽ
ÃŽÃŽ
ÃŽ
ÃŽÃŽÃŽÃŽ
VOH
ÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽ
ÃŽ
ÃŽÃŽÃŽÃŽÃŽÃŽÃŽ
ÃŽ
ÃŽ
ÃŽÃŽÃŽÃŽÃŽÃŽÃŽ
ÃŽ
ÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽ
Minimum High–Level Output
Voltage
ÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽ
ÃŽ
ÃŽÃŽÃŽÃŽÃŽÃŽÃŽ
ÃŽ
ÃŽ
ÃŽÃŽÃŽÃŽÃŽÃŽÃŽ
ÃŽ
ÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽ
Vin = VIH
|Iout|
v
20
µ
A
ÃŽÃŽÃŽÃŽ
ÃŽ
ÃŽÃŽ
ÃŽ
ÃŽ
ÃŽÃŽ
ÃŽ
ÃŽÃŽÃŽÃŽ
2.0
4.5
6.0
ÃŽÃŽÃŽ
ÃŽ
ÃŽÃŽ
ÃŽ
ÃŽÃŽ
ÃŽÃŽÃŽ
1.9
4.4
5.9
ÃŽÃŽÃŽÃŽ
ÃŽ
ÃŽÃŽ
ÃŽ
ÃŽ
ÃŽÃŽ
ÃŽ
ÃŽÃŽÃŽÃŽ
1.9
4.4
5.9
ÃŽÃŽÃŽÃŽ
ÃŽ
ÃŽÃŽ
ÃŽ
ÃŽ
ÃŽÃŽ
ÃŽ
ÃŽÃŽÃŽÃŽ
1.9
4.4
5.9
ÃŽÃŽÃŽ
ÃŽ
ÃŽ
ÃŽ
ÃŽ
ÃŽ
ÃŽ
ÃŽÃŽÃŽ
V
ÃŽÃŽÃŽÃŽ
ÃŽ
ÃŽÃŽ
ÃŽ
ÃŽÃŽÃŽÃŽ
ÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽ
ÃŽ
ÃŽÃŽÃŽÃŽÃŽÃŽÃŽ
ÃŽ
ÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽ
ÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽ
ÃŽ
ÃŽÃŽÃŽÃŽÃŽÃŽÃŽ
ÃŽ
ÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽÃŽ
Vin = VIH
|Iout|
v
3.6 mA
|Iout|
v
6.0 mA
|Iout|
v
7.8 mA
ÃŽÃŽÃŽÃŽ
ÃŽ
ÃŽÃŽ
ÃŽ
ÃŽÃŽÃŽÃŽ
3.0
4.5
6.0
ÃŽÃŽÃŽ
ÃŽ
ÃŽÃŽ
ÃŽÃŽÃŽ
2.48
3.98
5.48
ÃŽÃŽÃŽÃŽ
ÃŽ
ÃŽÃŽ
ÃŽ
ÃŽÃŽÃŽÃŽ
2.34
3.84
5.34
ÃŽÃŽÃŽÃŽ
ÃŽ
ÃŽÃŽ
ÃŽ
ÃŽÃŽÃŽÃŽ
2.20
3.70
5.20
ÃŽÃŽÃŽ
ÃŽ
ÃŽ
ÃŽ
ÃŽÃŽÃŽ
This device contains protection
circuitry to guard against damage
due to high static voltages or electric
fields. However, precautions must
be taken to avoid applications of any
voltage higher than maximum rated
voltages to this high–impedance cir-
cuit. For proper operation, Vin and
Vout should be constrained to the
range GND
v
(Vin or Vout)
v
VCC.
Unused inputs must always be
tied to an appropriate logic voltage
level (e.g., either GND or VCC).
Unused outputs must be left open.
